There are several different designs of the word clock.
There are examples for English, German, French and Dutch.
In the software it
is possible to add your own language.
All clocks are designed on PCBs (Printed Circuit board).
These PCBs are
designed in Fritzing and available in a Fritzing design format and as Gerber
file in a ZIP.
The zipped Gerber files can be uploaded to a company like
my supporter
PCBway that manufactures excellent PCBs with a good service.
The Fritzing
files can be used as a template for your own design.
KiCad can also be used
for creating electronic circuit schematics but there is unfortunately in 2024
still no translation between the two formats possible.
All designs communicate with a Bluetooth serial terminal
on a phone or tablet but also pocess a rotary encoder and DS3231 time module to
set the time and keep the time accurate to 20 seconds a year
There are
several built options for the word clock:
An ATMEGA328 chip with shift registers and white LEDs.
An Arduino Nano Every with WS2812 RGB or SK6812 RGBW LED-strips
An Arduino Nano ESP32 with WS2812 RGB or SK6812 RGBW LED-strips
An Arduino Nano ESP32 with shift registers and white
LEDs.
Pro
Sturdy design that did not had one failure in 40 clocks for over 10 years.
Can run with DCF77 time receiver
Uses a simple rotary to set time
Cons
A lot of soldering. But a pro if you like that
No WIFI NTP time
Pro
Cons
No WIFI NTP time
DCF77 only possible with receiver outside the clock
Pro
Cons
Pro
Cons